Grandstream HT503 doesn't HangUP
@mogan wrote: Hello, my configuration is:Asterisk (Ver. 11.18.0)FreePBX 12.0.76 I'm using Grandstream HT503 (HT-503 V2.0A Software Version: Program -- 1.0.14.1; Bootloader -- 1.0.0.18; Core --...
View ArticleGrandstream HT503 doesn't HangUP
@dicko wrote: Your ATA is responsible for "hang-up supervision", the settings on your fxo page need to agree with what your telco sends to signal a hangup condition (if indeed they are providing that...
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: Thanks for your reply. I will go through that line. Read full topic
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: BTW I'm not sure is exactly like you say cause I think the problem is in the way the PBX send the hang up tone to the ata cause the incoming call goes this way PSTN ----> Ata-FXO...
View ArticleGrandstream HT503 doesn't HangUP
@dicko wrote: hard to say, you have:- hanguponpolarityswitch=yes in your SIP connection to the ATA, this is not appropriate for a SIP connection. SIP has it's own protocol for signalling hangup, your...
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: I noticed that the problem is coming up only when the call start from outside. If the call start from an extension in the pbx range, the hang-up issue doesn't appear. I made two logs...
View ArticleGrandstream HT503 doesn't HangUP
@dicko wrote: Yep, that's a mismatch between the ATA and the provider, You need to find out what disconnect supervision your provider supplies, (if any) and so match it. . . Read full topic
View ArticleGrandstream HT503 doesn't HangUP
@james wrote: you have to check the hangup detection such as busydetect from your ATA GUI. Read full topic
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: Thanks a lot for your help. I think to be near to focus the real problem.Analyzing the Grandstream logs I found that when I hang up from internal phone (and the call started from...
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: Found that APOH stands for Another Phone Off Hook.Maybe could help. Read full topic
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: Hello, my configuration is:Asterisk (Ver. 11.18.0)FreePBX 12.0.76 I'm using Grandstream HT503 (HT-503 V2.0A Software Version: Program -- 1.0.14.1; Bootloader -- 1.0.0.18; Core --...
View ArticleGrandstream HT503 doesn't HangUP
@dicko wrote: Your ATA is responsible for "hang-up supervision", the settings on your fxo page need to agree with what your telco sends to signal a hangup condition (if indeed they are providing that...
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: Thanks for your reply. I will go through that line. Read full topic
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: BTW I'm not sure is exactly like you say cause I think the problem is in the way the PBX send the hang up tone to the ata cause the incoming call goes this way PSTN ----> Ata-FXO...
View ArticleGrandstream HT503 doesn't HangUP
@dicko wrote: hard to say, you have:- hanguponpolarityswitch=yes in your SIP connection to the ATA, this is not appropriate for a SIP connection. SIP has it's own protocol for signalling hangup, your...
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: I noticed that the problem is coming up only when the call start from outside. If the call start from an extension in the pbx range, the hang-up issue doesn't appear. I made two logs...
View ArticleGrandstream HT503 doesn't HangUP
@dicko wrote: Yep, that's a mismatch between the ATA and the provider, You need to find out what disconnect supervision your provider supplies, (if any) and so match it. . . Read full topic
View ArticleGrandstream HT503 doesn't HangUP
@james wrote: you have to check the hangup detection such as busydetect from your ATA GUI. Read full topic
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: Thanks a lot for your help. I think to be near to focus the real problem.Analyzing the Grandstream logs I found that when I hang up from internal phone (and the call started from...
View ArticleGrandstream HT503 doesn't HangUP
@mogan wrote: Found that APOH stands for Another Phone Off Hook.Maybe could help. Read full topic
View Article
More Pages to Explore .....